customer drawing 300 constitution dr menlo park, ca 94025, u.s.a. title: immersion resistant crimp splice 150 deg c, rohs compliant cold applied splice unless otherwise specified dimensions are in millimeters. [inches dimensions are shown in brackets] raychem devices document no.: d-436-3x-cold tolerances: 0.00 n/a 0.0 n/a 0 n/a angles: n/a roughness in micron tyco electronics rese rves the right to amend this drawing at any time. users should evaluate the suitability of the product for their application. rev: b date: march 10, 2011 revised by: unguyen cage code: 06090 eco number: eco-11-004984 scale: nts size: a sheet: 1 of 1 ? 2010-2011 tyco electronics corporation. all rights reserved. if this document is printed it becomes unc ontrolled. check for the latest revision. part number wire range l ? 1.0 ( ? 0.040) ? a ? 0.5 ( ? 0.020) ? b ? 0.25 ( ? 0.010) ? c ? 0.5 ( ? 0.020) e ? 0.25 ( ? 0.010) j ? 0.50 ( ? 0.020) end cap color code (both ends) D-436-36-COLD 26-24-22-20 36.8 (1.450) 4.2 (0.165) 2.0 (0.080) 3.7 (0.145) 12.1 (0.475) 12.7 (0.500) red d-436-37-cold 18-16 37.7 (1.484) 5.1 (0.200) 2.9 (0.115) 4.5 (0.175) 14.3 (0.565) 11.8 (0.464) blue d-436-38-cold 14-12 37.7 (1.484) 5.9 (0.235) 3.8 (0.150) 5.2 (0.205) 14.3 (0.565) 11.8 (0.464) yellow materials 1. insulation sleeve: heat-shrinkable, tr ansparent clear, radiation cross-linked modified polyvinylidene fluoride. 2. crimp: base metal: copper alloy 101 or 102 per astm b-75, annealed plating: tin-plate per astm-b545 3. end caps: thermoplastic, color coded (see table) 4. gel: clear silicone based gel. application 1. these parts are designed to provide immers ion resistant in-line splices of 1 to 1 wires falling within size range listed above, and having insulations rated for 105c. 2. crimp splices using a tyco electronics ad-1381 crimp tool. 3. install cold crimp splices pe r tyco electronics rpip-1102. 4. this document takes precedence over documents reference herein. 5. temperature range: -65 ? c to +150 ? c. l e ? b ? a ? c j (2 plc) 3 1 2 4
|
